Seite 1 von 1

Networking with Spamihilator

BeitragVerfasst: 29. Jun 2004, 15:44
von Gast
Hello,

for all people who want making access to Spamihilator from local network (for. ex. from any computer connected to our interface 192.168.0.1): one must download and install Fpipe http://www.foundstone.com, then run it with this command: fpipe -l 110 -r 110 127.0.0.1. Now Spamihilator can work for any client in our localnetwork ;-). Bye.

Michal.K

BeitragVerfasst: 30. Jun 2004, 13:10
von RossiRat
This is VERY interesting. Maybe i can host Spami for our (not so email trained and pc blessed) secretaries on a second machine. 8)

Meanwhile, there is a typo in the link. Here the Homepage:
http://www.foundstone.com

And the deep link:
http://www.foundstone.com/resources/proddesc/fpipe.htm

(The documention is in english. Translated it with google to german just for fun. :) :)
"Krauts" can so read something about "Brandmauern" and "Verkehr mit Quelltoren" *pfui* :oops: :wink:
Bob - HELP - we need this autotranslator - translator tool fast! :lol:)

BeitragVerfasst: 1. Jul 2004, 01:33
von Bob Loeffler
RossiRat hat geschrieben:Bob - HELP - we need this autotranslator - translator tool fast! :lol:)


Someone else will have to create that plugin. Hmmmm... maybe you could make a translator plugin that will translate autotranslated translations. ;-) I think I just confused myself! :shock:

Bob

Have I got it right?

BeitragVerfasst: 26. Okt 2004, 14:44
von Gast
Hallo Michal.K!

I'm very interested in the solution you suggested, but would like to check if i got it right. If my questions seem stupid, lets say I am forced to administer my network with absolutely no competence for that task:-(

1. Was your mail just an idea or did you implement it? You have that setup running now for some time and with no problems, right?

2. I run the fpipe at the server to redirect incoming traffic to localhost, the only host spami can use. Then in Eudora I specify the servers ip address as incoming mail server. Have I got this right?

3. I assume I have to make a bat file or something to run fpipe automatically when I restart my server?

4. Are there restrictions in the number of users?

Thaks very much if you have the time to help me!

Gruß
Anonymous

Good Answer but... it stays open

BeitragVerfasst: 6. Dez 2005, 10:14
von Gast
FPipe works WONDERFUL but there is one problem. It remains open in a command window when run. I found a work around.
http://www.teamcti.com/trayit/trayit.htm
Follow the directions. All your command windows will minimize to tray then but this is ok.

Hope this helps and THANK YOU THANK YOU for finding FPipe for me. It allows me to connect with my laptop WIFI at home without worrying about the spam

Not so good

BeitragVerfasst: 6. Dez 2005, 16:06
von Gast
Hi all,

since some work has to be done on the spami host (train the learning area, restore misfiltered messages, put pepople in the white list, ...)
i think using spami like you did is perhaps not a good idea...

I have a 20 hosts network here and finaly decide to put spami on each station and train people to use it...

I hope it helps

gilles

BeitragVerfasst: 8. Jan 2006, 12:48
von war59312
Nice find. Checking it out now.

Hey none,

I got a nice little command line tool that can run it in the background and invisible. :) If your interested...

Example:

hide.exe /wait "C:\E-Mail.bat"

This runs the batch file in the background and its window invisible. And always waits for the batch file to complete before quiting. :)

cya,

Will

Lösung für alle Spami2Service Nutzer

BeitragVerfasst: 31. Jan 2006, 13:56
von Gast
Da ich mir das Konzept mit Spami2Service angeschaut habe und es bei mir auch ziemlich rund läuft, habe ich mir direkt eine Lösung für FPipe gestrickt.

Als erstes muss ein Service angelegt werden. Dafür gibt man in der Commandozeile folgenden Befehl ein:
Code: Alles auswählen
"instsrv.exe" SpamiFPipe "[Laufwerksbuchstabe]:\[FPipe-Pfad]"


Anschliessend muss man Regedit öffnen. Dabei bitte SEEEEHR vorsichtig sein. Zunächst den Pfad suchen:
Code: Alles auswählen
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SpamiFPipe]


Dann rechtsklick auf SpamiFPipe klicken und einen neuen Schlüssel mit den Namen "Parameter" (ohne Anführungszeichen) anlegen. Den neuen Schlüssel dann anklicken und im rechten Bereich neue Zeichenketten mit dem jeweiligen Inhalt anlegen:
Code: Alles auswählen
Zeichenkette      Inhalt
----------------------------------------------------------------
"Application"      "S:\\server\\Spamihilator\\fpipe\\FPipe.exe"
"AppDirectory"      "S:\\server\\Spamihilator\\fpipe"
"AppParameters"      "-l 110 -r 110 127.0.0.1"


Ist das erledigt nochmals in der Commandozeile folgenden Befehl eingeben:
Code: Alles auswählen
net start SpamiFPipe

Wenn alles geklappt hat, läuft FPipe automatisch im Hintergrund. Dabei muss kein Fenster verkleinert werden noch muss ein Kontoangemeldet sein. Also auch was für den Serverbetrieb.

Da ich kein Forummitglied bin und auch nicht so regelmässig vorbei schaue könnte ihr mich über ein Kontaktformular auf unserer Firmenseite http://wdp-fischer.de erreichen

BeitragVerfasst: 31. Jan 2006, 13:58
von Gast
Mist doch noch was übersehen. Im Eifer des Gefechts habe ich die Pfade in den Registryeinträgen vergessen zu ersetzen. Diese müssen natürlich auch alle so "[Laufwerksbuchstabe]:\\[FPipe-Pfad]" aussehen.

BeitragVerfasst: 31. Jan 2006, 14:32
von anbuva
Hallo Bob Loeffler!

I think there isn't a machine translation machine yet which works (with the corresponding knowledge) better than a professional human Translator

Gruß
anbuva

BeitragVerfasst: 27. Feb 2006, 09:07
von Mwewe
Maybe I'm missing something, but I think you can access Spami on one machine from other machines with no fpipe or other programs. For example, I have a machine called "A" with IP address 192.168.2.25 that is running Spami. That means it is running a server listening on port 110 for incoming POP3 requests.

On another machine, called "B" with IP address 192.168.2.26, I set up my Outlook Express account to access A or 192.168.2.25 instead of 128.0.0.1 for incoming mail. Then set up the user name and password as you would if Spami were on B, only use the pop.somplace.com&joeblow form and don't use the service provider.

The disadvantages I see are:

1. The trapped spam will reside on A, and you will have to check the Spami recycle bin on that computer.

2. If you access your account this way from machine B, then go to machine A later, your mail will not be there, but will still be on B.

If you have several people on the LAN all using different mail accounts, then you're probably better off installing Spami on each machine. But there would be an advantage, for example, if you're the only one who would bother to scan the recycle bin. Then you could have all the junk mail in one place.

However, suppose Spami traps an incoming piece of mail into the recycle bin, but you decide it's real mail and should go to the recipient. If you restore it from the recycle bin, it goes into your mailbox on A even if it's for the person on B. Then you somehow have to get it to him/her.

That means there won't be much privacy, and it'll be somewhat intrusively obvious to the various users. Also, it's a big responsibility to decide if somebody else's email is junk or not. You could easily throw away something they think is important.

Regards,
Mwewe

fpipe give error 10035 when mail too large

BeitragVerfasst: 25. Okt 2006, 14:26
von Gast
Hi,
i have testing fpipe and it's working for small email

when an email is too large (i don't know how many but >100ko maybe),
fpie give a error 10035 ! ! !
and spami is waiting for timeout ...

i have tested with spami 0.9.9 and win 2k and XP

What's this ?
have you the same error ?
how to solve it ?

fpipe give error 10035 when mail too large

BeitragVerfasst: 25. Okt 2006, 14:33
von Gast
i'm forgot to tell i'm using fetchmail to get message:

pc -> server mail (fetchmail) -> spami -> net


Hi,
i have testing fpipe and it's working for small email

when an email is too large (i don't know how many but >100ko maybe),
fpie give a error 10035 ! ! !
and spami is waiting for timeout ...

i have tested with spami 0.9.9 and win 2k and XP

What's this ?
have you the same error ?
how to solve it ?

using autapf not fpipe

BeitragVerfasst: 26. Okt 2006, 12:38
von Gast
hi,
i have solved my problem by using autapf (http://www.networkactiv.com/AUTAPF.html)

fpipe is not working for large email (socket error 10035)

hope this will help some guys

have a nice day